Plastic bottle labeling remover machine

It is suitable for separating the labels and caps on beverage bottles, mineral water bottles and plastic bottles. The plastic bottle de-marking machine has simple structure, easy operation and clean de-marking, and realizes efficient and accurate mechanization and mass de-marking treatment without sorting. , Fast and convenient, low production cost.

Features:

This equipment is suitable for separating labels and caps on plastic bottles such as PET mineral water bottles, cola bottles, green tea bottles, black tea bottles, Wahaha bottles, C'estbon bottles, imported bottles, compressed bottles, packing bottles, etc.

        The label crushing device includes a crushing box and a knife barrel. The outer wall of the knife barrel is evenly installed with first blades, and the inner wall of the crushing box is evenly installed with second blades;

        The stripping device includes a separation box, a rotating shaft and a suction drum mounted on the rotating shaft. The surface of the suction drum is provided with air holes. The inner wall of the suction drum is provided with a cavity layer communicating with the air holes. The two ends of the cavity layer are provided with through holes. One end of the suction drum is provided with a suction disk, which is connected to the cavity layer through a channel and a through hole. The bottom and the top of the separation box are both vertically provided with baffles. Directly above and below, there is a gap between the baffle and the suction drum. The plastic bottle crushing and stripping machine can realize efficient and accurate mechanization and mass stripping processing without sorting.

       This equipment has reasonable structure design, high stability and long life. Under the condition of not affecting the rejection rate and the same output, the bottle mouth is not broken, the bottle body is not damaged, and the rejection rate is 98%. The separation rate is over 99.5%, and the separated label paper does not contain bottle caps, broken bottles, and bottle rings.

Process:

1. The stripping link consists of the stripping barrel, the main shaft and the movable knife on the shaft and the fixed knife on the barrel wall, and all adopt cemented carbide tips. The bottle body passes between the movable knife and the fixed knife during the mechanical advancement process. Peel off the label by contact;

2. The separation link is mainly composed of separation box, main fan and auxiliary motor, which are separated by wind. High efficiency, energy saving (no water required), convenience, and easy daily maintenance of machinery. The off-standard rate is as high as 98%.