PP/PE film washing recycling system

Pre-crushing and pre-washing most of the mud and sand and other impurities in the pre-washing system to protect subsequent equipment and greatly increase the service life of the fine crushing and washing system.

The crushing system is designed specifically, the size of the crushed film is uniform and easy to wash.

The high-speed centrifugal washing system applies corresponding blade strikes to different materials at a suitable rotation speed to achieve the washing effect.

The drum of the washing tank is designed for strong pressure underwater cleaning to remove residual impurities; the claw-type uniform speed discharge ensures uniform discharge while controlling the water content, providing a process basis for the dehydration module.

Film drying combined with centrifugal dewatering, screw squeezing and high temperature hot air strictly controls the moisture content of the finished product within 5%, which is suitable for granulation requirements.

After theoretical calculations and multiple actual measurements, the details of the mechanical operation of the crushing, cleaning, and drying links were adjusted, and the material was lost due to excessive processing.

The entire line is automatically controlled, and the units of the system are operated in association with each other, which maximizes the production capacity and has a predictive function for possible abnormal situations to maximize the stability of the system

Can be equipped with corresponding granulation system according to production requirements