Plastic granulator die head - China Pet Washing Line Manufacturer

Stplas - China Plastic Recycling Machine Line Manufacturer

Plastic granulator die head, suitable for single and double screw of plastic granulator, main machine filters plastic impurities or auxiliary machine drawing, granulator die head is divided into dual die head and single die head, double

The die head has two filter screens. The feeding direction can be changed during the screen change, which can be used without stopping the screen change. Generally, it is suitable for the main machine of the granulator, and the single die is suitable for the auxiliary of the granulator.

Machine drawing (the disadvantage of single die head is that the auxiliary machine of the granulator needs to be stopped during the filter screen change). Our company has a die head that does not need to stop the machine for continuous wire changing.

Move the valve.

Features

First, the die head is leaking

Plastic granulator die head, customers are worried about material leakage. After using it for a period of time, the screen of the die head often rubs, causing gaps in the bottom closed surface to cause material leakage. The inside of our company's die head

All friction surfaces of the stencil are milled with a milling machine, and then a layer of alloy is laid with an alloy welding rod for electric welding. The grinding machine is ground and reassembled, which greatly improves the wear resistance of the die head.

Slow heating

In the market, the die head usually uses a thin stainless steel electric heating plate, or the hole in the die head uses an electric heating rod to heat the die head and it takes more than an hour to heat it once. The heating time is long.

We use a ceramic electric heating plate. The entire electric heating plate uses ceramic heat transfer, and the heating time is greatly reduced. All wires use 6 square copper wires, heating is three hot wires and one zero

Wire heating, the use of electric wires evenly improves the safety of using electric wires.

There are two types of die heads: motor die head and hydraulic die head. The models are divided into 250, 300, 400, and 450 (the model is determined by the size of the filter plate).