All

When a lot of materials are recovered, a special process is required, that is, the step of reducing the size of the material. In order to facilitate the transportation, metering, storage and other requirements, the material is reduced to a moderate size, such as the common recovery of the material, the old Metal, rubber, etc. Other conditions, such as plastic film, can be reduced in size to allow uniform feeding in the comminution or extrusion process.

In order to facilitate transportation, measurement, storage and other requirements, materials are reduced to a moderate size, such as common recovery materials such as wood, old metal, rubber, etc. Others, such as plastic film, can be uniformly fed in the crushing or extrusion process by reducing its size.

A lot of material recovery when the requirements of a unique process, that is, the material to reduce the size of the pace, in order to facilitate transport, metering, storage and other needs to reduce the material to a moderate size, such as the common recovery of material wood, old metal, rubber and so on.

The plastic shredder machine industry is booming. Although it is not as good as the real estate industry, the profit from selling a set of equipment is quite large. If a company's products are of good quality and services are in place, it can be said that it is very worthwhile, so there are some prosperous market monopolies. Inevitably, it is not as serious as people think, mainly because of the obvious differences between different companies

The good development prospects of the plastics processing industry will continue to be the driving force for the rapid development of China's plastic machinery manufacturing industry. China's plastic machinery demand is expected to grow at an average annual rate of about 6%, and will reach 14.5 billion yuan in 2010. In other words, the development potential of China's plastic machinery industry is very large, and the endurance is very good, especially some models with high-tech content, good performance and relatively moderate price. Plastic recycling line, plastic pelletizing line and plastic washing machine has a good development prospects.

We know that the recovery rate of plastic bottles, especially PET bottles, is very high. There are many people who specialize in the recycling of plastic bottles. However, as a plastic bottle for hollow products, there are some problems worthy of our attention in the recycling process. Today, Stplas Machinery, China plastic pet bottle recycling machine line manufacturer analyzes with you.

Recently, with the rapid development of the plastics industry, some waste products are usually produced in the production process, so many manufacturers need to consider how to recycle these wastes. In some factories, some waste pipes are hand sawed into small pieces and then broken. In doing so, the recovery rate is very low. What can I do to solve these problems? Try using a plastic shredder.

The typical representative of polypropylene refers to waste plastics such as woven bags, snakeskin bags, packing bags, cement bags, fertilizer outer bags, woven awning belts and many polypropylene living appliances. The general work of cleaning polypropylene waste materials is commonly used in woven bags. The material has a hard texture, the plasticizing critical temperature is higher, and the cleaning and processing requirements are higher.

1. Whether the main motor current is stable (should be strictly controlled within the rated current). If the fluctuation is too large or rises sharply, control should be taken. Appropriate adjustments should be made in the way of the discharge flow, and if necessary, stop the inspection.

What is the function of the plastic granulator cooling system? After the extruded strip leaves the machine head, the waste foam should be cooled and shaped immediately, otherwise it will be deformed under the action of gravity.

China has the largest market for waste plastic recycling machine pelletizing line and has the largest market demand, so the demand for plastic granulator machine is becoming more and more obvious. However, due to the weak innovation capability of China's plastic machinery, in the current situation, it is far from satisfying the recycling of waste plastics!

Since its inception, Stplas has been focusing on research and development of extruder equipment, waste plastic washing equipment, plastic granulators, waste film washing and granulating equipment, waste plastic recycling granulators and related auxiliary machines. The company's main products are; twin-screw extruder, single-screw extruder, high-speed mixer, mill; with years of experience and unremitting efforts and pursuit; from process design to extrusion system solutions They have a wealth of experience and well-established expertise.

Nowadays, many people's living standards and conditions have been greatly improved. In our lives, many high-tech products have appeared in our lives. Waste plastic recycling granulators are such a kind of equipment. It has a great effect on us. Today, the manufacturer of waste plastic recycling granulators will talk to you about the role of waste plastic recycling granulators.

Whether the main motor current is stable (should be strictly controlled within the rated current), if the fluctuation is too large or rises sharply, it should be taken Control the flow rate of the material to be properly adjusted, and if necessary, stop the inspection.

1. Crushing: Select a suitable crusher (forced feed mill) and adjust the distance between the knife and the bottom of the screen to prevent too much debris. 2. Main wash: use equipment with washing and heating function (main belt washing machine), and ensure the washing time; use appropriate cleaning agent to ensure that all stubborn stains are washed away.

In China, at present, on the one hand, the recovery rate of waste plastics is not high, and there are not many waste plastic recycling plants, especially the uneven distribution, and most places are almost blank. On the other hand, China has developed rapidly in recent years, and the market is prosperous. There are dozens of large plastics markets. The supply of waste plastic pellets is in short supply and the prices are rising rapidly. Therefore, the disposal of waste plastic pellets will soon become a development trend. Particle processing will be the focus of future development. As a major processing machine, the waste plastic recycling line will have a large customer base.

In China, at present, on the one hand, the recovery rate of waste plastics is not high, and there are not many waste plastic recycling plants, especially the uneven distribution, and most places are almost blank. On the other hand, China has developed rapidly in recent years, and the market is prosperous. There are dozens of large plastics markets. The supply of waste plastic pellets is in short supply and the prices are rising rapidly. Therefore, the disposal of waste plastic pellets will soon become a development trend. Particle processing will be the focus of future development. As a major processing machine, the waste plastic recycling granulator machine line will have a large customer base.

1. For cylinders with larger strokes, support should be provided in the middle of the cylinder block and the piston rod to prevent downward bending due to self-weight.

The ratio of the three sections of different screws is different, the depth of the screw groove is different, the transition form of the screw bottom diameter is different, and the three sections of the screw of the plastic granulator have different functions and uses: (1) Feeding section: This section has a fixed depth of the groove and is used for preheating and plastic solid conveying and extrusion. The plastic begins the melting process at the end of the feed section.

Whether the main motor current is stable (should be strictly controlled within the rated current). If the fluctuation is too large or rises sharply, it should be adjusted according to the way of controlling the flow rate of the material, and if necessary, stop the inspection.

Requirements for electrothermal materials For materials used as electric heating elements (such as heating coils) (such as resistance wires), the following requirements should be met: 1 has a relatively high resistivity ρ, the larger the resistivity, the more material used, the smaller the component volume.

1. Poor or blocked pipes may cause blockage of the plastic shredder. Improper matching of the conveying equipment will also cause the wind in the discharge pipe to be weakened or blocked after no wind.

The energy saving of a Pet washing line can be divided into two parts: one is the power part and the other is the heating part.

The plastic pelletizing machine comprises a hopper, a handpiece, plastic which is plasticized into a uniform melt by an extrusion system, and which is continuously extruded by the screw under the pressure established in the process.

When operating a China pet washing line from Chinese factory, pay attention to the following issues: 1. It is strictly forbidden for unrelated personnel to talk with the equipment operator, and only one person can operate the button command on the electronic control panel;

What are the precautions for China pet washing line during normal operation: 1. When the head pressure exceeds the set alarm value, the material pressure alarm signal light is on and automatically stops.

The screw barrels used in China's pet washing line equipment are more severely polarized. Some mechanical repair shops or small processing plants usually use ordinary carbon structural steel, and the simple machine assembled by the simplest and rough processing technology. The essence is to copy the formal equipment at the lowest cost and supply some of the same non-standard workshop waste plastic recycling processing plants. In this case, because the core components are quickly worn and the service life is extremely low, and some products are less than two or three hundred tons of products, the output is greatly reduced, and even the serious situation of not eating or screw breaking occurs. First, it is a low-cost, low-cost, low-cost, low-cost, low-priced, small-customer; the second reason is limited by processing conditions and processing technology, can not achieve breakthroughs in key components and core technologies, equipment life is low, The quality of the processed products is poor and the life of the machine is short, so these soil machines are accelerating to be eliminated.

PET Washing line is a self-adhesive (or external binder) in which the solid powder and the liquid coexist and is mainly composed of a solid phase (such as extrusion, gravity). , centrifugal force, mechanical force, air current impulse, etc.) make the basic particles of the solid powder adhere to each other, increase, and form a group of particles with a certain shape and uniform particle size.

In recent years, the national environmental protection inspections have been stricter, and some small, workshop-style regenerative granulation manufacturers have also shut down due to environmental protection failures, or to let the environmental protection equipment.

The large-scale plastic pet washing line of China produced by our company adopts fully automatic design, which can better serve customers and fully reflect the value of equipment. In order to facilitate your objective understanding of cost and profit, we will produce 30 tons per month. For example, a production line, processing high-pressure polyethylene waste, using relatively conservative data, carefully calculate the actual profit of a reclaimed plastic pellet factory for investors' reference.

Recently, our company has improved the equipment of China pet bottle washing line. The old plastic pet bottle washing line. mainly relies on manual feeding and coal heating, which wastes labor and pollutes the environment. The new plastic pet bottle washing line. adopts one-stop design and is used for feeding. Conveyor transportation, saving manpower, heating using electromagnetic heating, clean and environmentally friendly, green and energy saving.

With the strict environmental protection requirements of the country, China small pet washing line on the market have disappeared. Most of pet washing line used in the past were heated by coal to produce emissions, and the plastics produced during heating were also very heavy, and smells from far away, affecting the surrounding air quality.

Recently, our company has improved the equipment of plastic granulator pet washing line. The old plastic pelletizing machine mainly relies on manual feeding and coal heating, which wastes labor and pollutes the environment. The new plastic granulator adopts one-stop design and is used for feeding. Conveyor transportation, saving manpower, heating using electromagnetic heating, clean and environmentally friendly, green and energy saving.

In recent years, the national environmental protection inspections have been stricter, and some small, workshop-style regenerative granulation manufacturers have also shut down due to environmental protection failures, or it is to let the environmental protection equipment.

All customers who have ordered equipment in our factory need to confirm the site clearly. Our company can produce equipment according to the characteristics of the customer's site. Tell us the pet bottle washing line manufacturer in advance, otherwise we will produce according to the standard method. Because the equipment is relatively large, it will be compared after the production is changed.

Nowadays, pet bottle washing line manufacturers is in short supply. The cash transaction is not credited, and the first-hand delivery of the plastic pellets will be carried out. As long as the plastic pellets are produced, there will be people buying them. There will be no accumulation of goods, and the funds will be directly returned. At home, the buyers will wait for the acquisition. In the past, the opposite is true. After the plastic pellets are produced, they are piled up in piles, and the pellets are sent to the purchaser. The purchaser is not a cash transaction, and it will be settled if a batch of goods is pressed.

During this time, China plastic bottle recycling machine washing line can be consulted. The consultation questions are mostly responsible for the installation and commissioning of your company? Where do the sources of raw materials come from? What if the plastic pellets that are made cannot be sold?

Pet bottle recycling machine washing line is mainly used for processing waste plastic film, industrial packaging film, agricultural film, greenhouse film, beer bag, handbag, woven bag, agricultural convenience bag, basin, barrel, beverage bottle, furniture, daily necessities, etc. It is suitable for most common waste plastics. These plastics are processed by plastic pelletizer pelletizers to make plastic pellets and put into use again.

The plastic granulator produced by our company has reasonable design and humanized structure. Each design is considered from the customer's starting point and is convenient for customers to operate. I will introduce you to the mold of the plastic pet bottle recycling washing machine line today.

Plastic recycling machine pet bottle washing line use detailed analysis: bottle products such as cola, mineral water bottles; electrical sockets, electronic connectors, rice cooker handles, TV deflection yoke, terminal block; breaker housing, switch, motor fan housing; Instrumentation mechanical parts, cash counting machines, electric irons, accessories for induction cooktops; flow control valves, carburetor covers, window controllers, pedal transmissions, switchboard covers in the automotive industry; gears and blades for machinery industry Pulleys, pump parts, wheelchair bodies and wheels, lampshade housings, illuminator housings, drain fittings, zippers, clocks, etc.

Multi-functional plastic recycling machine pet bottle washing line smoke treatment equipment is a loyal and environmentally friendly practitioner. Henan Huaxing plastic granulator smoke treatment equipment adopts extrusion stripping granulation process, which can be used for most polymer materials such as PP, PE, PET, PS, ABS, PA, PVC, PC, POM, EVA, PMMA, PPS. Such as filling modification, recycled materials, cable materials, masterbatch and color mixing granulation. The plastic granulator smoke treatment equipment works in a simple process. The main components are extruder, screen changer, draw dies, cooling water tank, air dryer, pelletizer, and raw material collection system.

With the country's stringent environmental requirements, now the market of plastic recycling machine pet washing line has disappeared. In the past, most of the small granulators were coal heating to produce emissions, and the plastic produced when heated is also very heavy, from a far away can smell odor, affecting the surrounding air quality.

The plastic crushing recycling machine is mainly used to carry out the crushing of plastic bottles. When crushed, it can be used as feed to play the role of energy utilization. In order to let everyone know more about this equipment, today is small. The editor will give you a detailed introduction to the advantages of pet washing line. The first advantage is that the investment cost is relatively low. It takes only a few thousand dollars to buy a plastic crushing recycling machine, but the cost when using it is Very low, only need to spend electricity to run, because the investment cost is relatively low, after a period of production can be returned to the original.

Plastic granulator smoke smoke treatment equipment Plastic recycling machine appreciation space is large? Henan Huaxing specializes in the production of plastic machinery manufacturers, on the basis of extensive digestion and absorption of foreign advanced plastic granulator smoke flue gas treatment equipment, independently research and development of a new generation of environmentally friendly multi-functional high-efficiency plastic granulator smoke flue gas treatment equipment

With the rapid development of the plastics industry, the quantity of waste plastics is constantly increasing. The recycling of waste plastic products is a good way to dispose of waste, not only can turn waste into treasure, increase wealth, but also help to control environmental pollution and improve life. The environment has therefore received universal attention from all countries in the world.

STPLAS specializes in the production and development of new high-efficiency waste plastic recycling crushing machine, which fully recycles white pollutants that cause serious damage to the ecological environment, and rationally utilizes them to fully convert waste into usable resources. The unit is suitable for waste film such as PE, EVA, PVC, PP, etc. and PE, PVC, ABC, PP and other pulverized materials as well as PE and PP powder. The main raw materials are: old mulch film, greenhouse film, nylon film and textile bag, industrial Waste plastics and other waste materials are used as processing raw materials.

Plastic is not the enemy of the environment! Plastic is an energy-saving material that can replace other products to save energy and reduce greenhouse gas emissions. If plastic is not used, the world's energy resources will become more tense and air pollution will become more serious. Recently, at the 20th Asian Plastics Forum held in Taizhou, Zhejiang, the above viewpoint became the consensus of the plastics industry in participating countries. However, industry insiders also said that although the plastics industry has bright prospects, it must also face up to the increasingly serious environmental problems caused by the heavy use of plastic bags and plastic products. National Plastics Association believes that encouraging the reuse of plastic products and better recycling of waste plastics is the key to the sustainable development of the plastics industry.

Environmentally-friendly waste plastic shredder The metal crusher has a large output power. The waste plastic shredder is a machine that is used for fine crushing, and is generally used to process unprocessed raw materials or scraps to make them small and small. To give an example: the plastic or rubber scrap is shredded and then used as a raw material to melt and then granulate, used to re-create plastic bottles, tires or plastic products. The waste plastic shredder is used in the plastic recycling granulation industry, and is often used for the crushing of large-diameter PE plastic pipes, bundled plastic film, large plastic sheets and machine heads. According to the figures, the waste plastic shredder is used to shred other solid or hollow materials such as plastics, rubber, tires, fibers, paper, wood, iron drums, used electrical appliances, used cables, industrial trim, and living products.

China Waste plastic shredders industrial crusher shredders manufacturer have entered people's production and life. Waste plastic shredders can also be called plastic shredders and plastic crushers.

Waste plastic shredder What are the precautions for blade selection for plastic shredders? As everyone knows: I know that the blade of a good waste plastic shredder is so important to your production. As a manufacturer, I will briefly introduce the points that need to be paid attention to when selecting waste plastic shredder blades.

The common structure of China plastic shredder is mainly three-axis or four-axis shearing type, single-axis roll cutting type, coarse crushing and tearing type. The shear type shredder is usually a shear type shredder, which has Two to four knives, mainly relying on the principle of "shearing and cutting" to complete the smashing process. The principle of tearing is to smash objects like scissors.

The China plastic shredder produced by stplas - Chinese plastic washing line recycling machine manufacturer does not block the material and has great advantages in utilization. The common structure of the plastic crusher is mainly three-axis or four-axis shearing type, single-axis roll cutting type, coarse crushing and tearing type. The shear type shredder is usually a shear type shredder, which has Two to four knives, mainly relying on the principle of "shearing and cutting" to complete the smashing process. The principle of this tearing is to smash the object like a scissors. The above is provided by stplas

Double-shaft shredders Plastic shredders have achieved great results in the industry. The twin shaft shredder is a machine used as a coarse shredder. The trolley tire twin shaft shredder is used to shred different metals, plastics, rubber, tires, fibers, paper, wood, iron drums, waste electrical appliances, waste cables Solid or hollow materials such as industrial scraps, household products, etc., making them small and small.

1. Before using the plastic shredder, you should use your hands to turn the drive wheel one or two times, and then turn it on after confirming that the rotation is normal and without obstacles. Only after the machine runs normally can it start feeding

The plastic shredder produced by STPLAS Machinery Manufacturing Co., Ltd. does not block the material and uses the advantages of great value. The common structure of shredder is mainly three types: biaxial or four-axis shearing type, single-axis roll cutting type, coarse crushing and tearing type, etc. The common type of shearing shredder is shearing type shredder. Two to four knife shafts mainly rely on the principle of "shear and cut" to complete the crushing process. The principle of this tearing is to smash objects like scissors.

China large-scale waste PE film recycling and washing line has a high output efficiency. Main configuration and main equipment of waste PE film recycling and cleaning line: climbing conveyor belt, large-diameter crusher, friction cleaning machine, automatic rinsing wheel set, automatic fishing machine, soft plastic forced dehydration machine, plastic film dryer, cyclone conveyor , Rear equipment and other equipment.

During the pelletizing process of the plastic pelletizing extruder, it is a common problem to find that black spots appear in the pellets that have been pumped. So how to deal with the black spots in the plastic pelletizing process? What causes this phenomenon?

Waste film washing line equipment is the leader in recycling equipment. The granules produced by the waste film washing line equipment are used in industries such as film blowing, bag making, wire drawing, and injection molding. Mainly used in waste polyethylene (PE) such as: plastic films, convenience bags, greenhouse films, lined bags, packaging films, etc. or waste polypropylene (PP) such as: woven bags, space bags, cement packaging bags, etc. Equipment for extruding, cooling, pelletizing, and producing plastic pellets.

In recent years, the global petrochemical industry has developed extremely rapidly and violently. The demand for plastic recycling granulators has increased rapidly and has broad development prospects. In the face of serious energy and environmental problems, in the future, the modified plastic recycling and granulator equipment will become larger and larger, and users will have higher and higher requirements for the mechanical stability and energy saving of the unit.

Screw plastic granulator extruder is one of the most important equipment for plastic molding processing. It uses solid power transportation, compaction, melting and shear mixing extrusion molding of plastics through external power transmission and heat transfer from external heating elements. Since the birth of screw extruder, after nearly a century of development, it has developed from a common screw extruder to a new type of screw plastic pelletizing extruder. Although there are many types of new screw extruders, they are basically the same in terms of the extrusion mechanism. The extrusion process of the traditional screw plastic pelletizing extruder is realized by external heating of the barrel, friction between solid materials and the barrel, screw friction and melt shearing force. "Friction coefficient" and "friction", "viscosity" and "shear stress" are the main factors affecting the working performance of traditional screw extruders. Because the factors affecting "friction" and "viscosity" are very complex, therefore The extruder extrusion process is an unstable state and difficult to control. It is particularly prominent for some thermally sensitive plastics with poor thermal stability and high viscosity. Since the 1960s, scholars from various countries around the world have done a lot of research on the screw extrusion mechanism and have made significant achievements, but because their research is mostly limited to traditional plastic extrusion molding mechanisms, mechanical structure forms and energy conversion methods, There has been no major breakthrough. A series of shortcomings of the traditional screw extruder, such as large volume, high energy consumption, high noise, and difficult to improve product quality, have not been fundamentally solved.

1. Before using the plastic shredder, you should use your hands to turn the drive wheel one or two times, and then turn it on after confirming that the rotation is normal. 2. Before stopping the rotation of the machine, stop feeding and clean up the waste of the plastic machine before power off.

PP ton bag / woven bag is also commonly known as snake skin bag. It is a kind of plastic product used for packaging. It is made of warp and weft. Due to their different uses, colors, gram weights, length and width, and other parameters, ton bags / woven bags are divided into several types.

In recent years, the global petrochemical industry has developed extremely rapidly and violently. The demand for plastic recycling granulators has increased rapidly and has broad development prospects. In the face of serious energy and environmental problems, in the future, the modified plastic recycling granulator equipment will become larger and larger, and users will have higher and higher requirements for the mechanical stability and energy saving of the unit.

The auxiliary equipment of the plastic granulating unit mainly includes a pay-off device, a straightening device, a preheating device, a cooling device, a traction device, a meter counter, a spark tester, and a take-up device. Extruder units have different optional auxiliary equipment for different purposes. Such as cutters, blow dryers, printing devices and so on.

During the Covid-19, we can not meet each others. As the customers requirement, we successfully have a meeting with our customer in Bangladesh via videos.